Seismic Network Operations

IU RAR

Rarotonga, Cook Islands

IU RAR commences operations on: 1992,067

Country Flag
Host: Institute of Geological and Nuclear Sciences
Latitude: -21.212
Longitude: -159.773
Elevation: 28
Datalogger: Q330
Broadband: KS-54000
Accelerometer: FBA_ES-T_EpiSensor_Accelerometer
Telemetry Status at the NEIC: Last Data In Less Than 10 Minutes
Station Photo Station Photo Station Photo 

Vault Condition: Borehole for Z, N, and E channels. The STS-1/VBB seismometers are located in a small concrete building approximately 20 x 12 feet. Piers are not isolated from the floor, but are attached to surface rock. A small air conditioner inside the building controls temperature and humidity.

Site Geology: To about 85 meters geology is an alternating series of hard basalt and unstable flowing material, scoria, gravels and sands. Below 85 meters there is a consistent sequence of basalts.

Location CodeChannel CodeInstrumentFlagsSample RateDipAzimuthDepth
10LH2Streckeisen STS-2 High-gainCG1.000.0090.000.00
20LNZKinemetrics FBA ES-T EpiSensor AccelerometerCG1.00-90.000.000.00
20LN2Kinemetrics FBA ES-T EpiSensor AccelerometerCG1.000.0090.000.00
20LN1Kinemetrics FBA ES-T EpiSensor AccelerometerCG1.000.000.000.00
10VHZStreckeisen STS-2 High-gainCG0.10-90.000.000.00
10VH2Streckeisen STS-2 High-gainCG0.100.0090.000.00
10VH1Streckeisen STS-2 High-gainCG0.100.000.000.00
10LHZStreckeisen STS-2 High-gainCG1.00-90.000.000.00
10LH1Streckeisen STS-2 High-gainCG1.000.000.000.00
10BHZStreckeisen STS-2 High-gainCG40.00-90.000.000.00
10BH2Streckeisen STS-2 High-gainCG40.000.0090.000.00
10BH1Streckeisen STS-2 High-gainCG40.000.000.000.00
00VHZGeotech KS-54000 Borehole SeismometerCG0.10-90.000.00101.00
00VH2Geotech KS-54000 Borehole SeismometerCG0.100.0076.00101.00
00VH1Geotech KS-54000 Borehole SeismometerCG0.100.00346.00101.00
00LHZGeotech KS-54000 Borehole SeismometerCG1.00-90.000.00101.00
00LH2Geotech KS-54000 Borehole SeismometerCG1.000.0076.00101.00
00LH1Geotech KS-54000 Borehole SeismometerCG1.000.00346.00101.00
00BHZGeotech KS-54000 Borehole SeismometerCG20.00-90.000.00101.00
00BH2Geotech KS-54000 Borehole SeismometerCG20.000.0076.00101.00
00BH1Geotech KS-54000 Borehole SeismometerCG20.000.00346.00101.00
10VMWStreckeisen STS-2 High-gainCH0.100.000.001.00
10VMVStreckeisen STS-2 High-gainCH0.100.000.001.00
10VMUStreckeisen STS-2 High-gainCH0.100.000.001.00
00VMZGeotech KS-54000 Borehole SeismometerCH0.100.000.00145.00
00VM2Geotech KS-54000 Borehole SeismometerCH0.100.000.00145.00
00VM1Geotech KS-54000 Borehole SeismometerCH0.100.000.00145.00
20HNZKinemetrics FBA ES-T EpiSensor AccelerometerTG100.00-90.000.000.00
20HN2Kinemetrics FBA ES-T EpiSensor AccelerometerTG100.000.0090.000.00
20HN1Kinemetrics FBA ES-T EpiSensor AccelerometerTG100.000.000.000.00
10HHZStreckeisen STS-2 High-gainTG100.00-90.000.000.00
10HH2Streckeisen STS-2 High-gainTG100.000.0090.000.00
10HH1Streckeisen STS-2 High-gainTG100.000.000.000.00
PDF, All
Image Unavailable

PDF, Last Month
Image Unavailable

PDF, Month
Image Unavailable

PDF, Current Week
Image Unavailable

PDF, Year
Image Unavailable

Heliplot
Image Unavailable
Latency
Image Unavailable

Availability, Year
Image Unavailable

Availability, Since 1972
Image Unavailable

Availability, 2 Month
Image Unavailable

As part of the annual calibration process, the USGS runs a sequence that includes a random, a step, and several sine wave calibrations.  The USGS analyzes the random binary calibration signal in order to estimate the instrument response.  The figures below show the results from the analysis of the most recent processed calibration at the station.

We use an iterative three-step method to estimate instrument response parameters (poles, zeros, sensitivity and gain) and their associated errors using random calibration signals. First, we solve a coarse non-linear inverse problem using a least squares grid search to yield a first approximation to the solution. This approach reduces the likelihood of poorly estimated parameters (a local-minimum solution) caused by noise in the calibration records and enhances algorithm convergence. Second, we iteratively solve a non-linear parameter estimation problem to obtain the least squares best-fit Laplace pole/zero/gain model. Third, by applying the central limit theorem we estimate the errors in this pole/zero model by solving the inverse problem at each frequency in a 2/3rds-octave band centered at each best-fit pole/zero frequency. This procedure yields error estimates of the 99% confidence interval.

LocChanCal DateEpoch-SpanGradeAmp Nominal Error (dB)Amp Best Fit Error (dB)Phase Nominal Error (degree)Phase Best Fit Error (degree)SensorCal Type
00BH12014:1062010:352 to No Ending TimeA0.0222920.00646440.0793890.08043454000Random
00BHZ2014:1062010:352 to No Ending TimeA0.0132290.00589640.0715120.06029854000Random
00BH22014:1062010:352 to No Ending TimeA0.0244530.00675160.0845390.09653554000Random
10BHZ2014:1072010:061 to No Ending TimeA0.0149460.0148210.11970.078667STS-2-HGRandom
  1. Current Issues
    KS-54000 is showing high noise levels.
  2. 2010-12-18
    KS-54000 seismometer replaced.
  3. 2010-03-07
    Upgraded to Q330 digitizer. KS-54000 failed.