Seismic Network Operations

As part of the annual calibration process, the USGS runs a sequence that includes a random, a step, and several sine wave calibrations.  The USGS analyzes the random binary calibration signal in order to estimate the instrument response.  The figures below show the results from the analysis of the most recent processed calibration at the station.

We use an iterative three-step method to estimate instrument response parameters (poles, zeros, sensitivity and gain) and their associated errors using random calibration signals. First, we solve a coarse non-linear inverse problem using a least squares grid search to yield a first approximation to the solution. This approach reduces the likelihood of poorly estimated parameters (a local-minimum solution) caused by noise in the calibration records and enhances algorithm convergence. Second, we iteratively solve a non-linear parameter estimation problem to obtain the least squares best-fit Laplace pole/zero/gain model. Third, by applying the central limit theorem we estimate the errors in this pole/zero model by solving the inverse problem at each frequency in a 2/3rds-octave band centered at each best-fit pole/zero frequency. This procedure yields error estimates of the 99% confidence interval.

1. Current Issues
   KS54000 is stuck in hole but providing some usable data (Z channel is inoperable). Need a return trip to blow the sand out and replace the seismometer.
2. 2009-11-06
   Upgraded to Q330 digitizer.

• "Universidade de Brasilia, Brazil"
• CTBTO
• USGS GSN Program
• National Science Foundation
• Incorporated Research Institutions in Seismology

• IRIS MetaData Aggregator
• Brazil Earthquake Information