BRIB Site Information Form (site log) BARD Continuously Operating Reference Station See Instructions at: ftp://igscb.jpl.nasa.gov/pub/station/general/sitelog_instr.txt 0. Form Prepared by (full name) : Ingrid Johanson Date Prepared : 2010-09-30 Report Type : UPDATE If Update: Previous Site Log : brib_20100406.log Modified/Added Sections : 1. Site Identification of the GNSS Monument Site Name : Briones Reservoir Four Character ID : BRIB Monument Inscription : IERS DOMES Number : CDP Number : Monument Description : Height of the Monument : Monument Foundation : Foundation Depth : Marker Description : Date Installed : 1993-08-06T00:00Z Geologic Characteristic : BEDROCK Bedrock Type : SEDIMENTARY Bedrock Condition : Fracture Spacing : Fault zones nearby : Distance/activity : Additional Information : Current monument, installed 24-MAR-2000, : is poured concrete cylinder with : continuous steel reinforcement to older : monument. Reference point is mark on : SCIGN adaptor. : BARD - Bay Area Regional Deformation : : Original monument, valid 06-Aug-1993 to : 23-MAR-2000, was drilled and cemented : into massive sandstone outcrop. Threaded : 5/8" rod cemented about 0.8m deep into : rock with stainless steel collar at : surface. Antenna threaded onto rod in : reproducible manner. Mark was top center : of rod. 2. Site Location Information City or Town : Rural, near Lafayette, California State or Province : California Country : USA Tectonic Plate : Pacific-North America plate boundary Approximate Position (ITRF) X coordinate (m) : -2681173.4810 Y coordinate (m) : -4265461.0970 Z coordinate (m) : 3898552.5202 Latitude (N is +) : +375509.84 Longitude (E is +) : -1220909.36 Elevation (m,ellips.) : 263.17 Additional Information : On Univ of Calif's Russel Reservation, : adjacent to Leuschner Observatory. : Current reference point. Original reference : point was destroyed during installation : of new concrete pier monument (see 1.) 3. GNSS Receiver Information 3.1 Receiver Type : ASHTECH P-XII3 Satellite System : GPS Serial Number : 700363D02275 Firmware Version : 7A Elevation Cutoff Setting : Date Installed : 1993-08-14T00:00Z Date Removed : 1993-12-29T00:00Z Temperature Stabiliz. : Additional Information : 3.2 Receiver Type : ASHTECH Z-XII3 Satellite System : GPS Serial Number : 700724A02270 Firmware Version : 1C01 Elevation Cutoff Setting : Date Installed : 1993-12-29T18:56Z Date Removed : 1994-01-20T00:00Z Temperature Stabiliz. : Additional Information : 3.3 Receiver Type : ASHTECH P-XII3 Satellite System : GPS Serial Number : 700363D02275 Firmware Version : 7A Elevation Cutoff Setting : Date Installed : 1994-01-20T00:00Z Date Removed : 1994-02-14T00:00Z Temperature Stabiliz. : Additional Information : Operating in codeless mode 02Feb94-14Feb94 3.4 Receiver Type : ASHTECH Z-XII3 Satellite System : GPS Serial Number : 700724B02274 Firmware Version : 1C01 Elevation Cutoff Setting : Date Installed : 1994-02-14T21:16Z Date Removed : 1996-06-04T17:07Z Temperature Stabiliz. : Additional Information : 3.5 Receiver Type : ASHTECH Z-XII3 Satellite System : GPS Serial Number : LP01395 Firmware Version : 1E86 Elevation Cutoff Setting : Date Installed : 1996-06-04T17:07Z Date Removed : 1999-01-29T18:20Z Temperature Stabiliz. : Additional Information : 3.6 Receiver Type : ASHTECH Z-XII3 Satellite System : GPS Serial Number : LP01395 Firmware Version : 1F60 Elevation Cutoff Setting : Date Installed : 1999-01-29T18:56Z Date Removed : 1999-06-24T20:10Z Temperature Stabiliz. : Additional Information : 3.7 Receiver Type : ASHTECH Z-XII3 Satellite System : GPS Serial Number : LP01395 Firmware Version : CC00 Elevation Cutoff Setting : Date Installed : 1999-06-24T20:33Z Date Removed : 2006-12-08T23:50Z Temperature Stabiliz. : Additional Information : 3.8 Receiver Type : TRIMBLE NETRS Satellite System : GPS Serial Number : 4610206092 Firmware Version : 1.1-5 Elevation Cutoff Setting : Date Installed : 2006-12-08T23:50Z Date Removed : 2010-09-29T01:22Z Temperature Stabiliz. : Additional Information : P/N 45905-01 3.9 Receiver Type : TRIMBLE NETRS Satellite System : GPS Serial Number : 4610206092 Firmware Version : 1.3-0 Elevation Cutoff Setting : Date Installed : 2010-09-29T01:22Z Date Removed : Temperature Stabiliz. : Additional Information : P/N 45905-01 3.x Receiver Type : (A20, from rcvr_ant.tab; see instructions) Satellite System : (GPS/GLONASS/GPS+GLONASS) Serial Number : (A20, but note the first A5 is used in SINEX) Firmware Version : (A11) Elevation Cutoff Setting : (deg) Date Installed : (CCYY-MM-DDThh:mmZ) Date Removed : (CCYY-MM-DDThh:mmZ) Temperature Stabiliz. : (none or tolerance in degrees C) Additional Information : (multiple lines) 4. GNSS Antenna Information 4.1 Antenna Type : ASH700228D ENCL Serial Number : 700228D2133 Antenna Reference Point : Bottom of tripod mount collar. Marker->ARP Up Ecc. (m) : -0.015 Marker->ARP North Ecc(m) : Marker->ARP East Ecc(m) : Alignment from True N : 0 Antenna Radome Type : ENCL Radome Serial Number : Antenna Cable Type : Antenna Cable Length : Date Installed : 1993-08-13T00:00Z Date Removed : 2000-03-23T21:50Z Additional Information : Antenna height measured relative to : original reference point. : Radome is a plexiglass skylight enclosure 4.2 Antenna Type : ASH701945B_M SCIT Serial Number : CR519992110 Antenna Reference Point : BPA Marker->ARP Up Ecc. (m) : 0.0083 Marker->ARP North Ecc(m) : Marker->ARP East Ecc(m) : Alignment from True N : 0 Antenna Radome Type : SCIT Radome Serial Number : 00347 Antenna Cable Type : Antenna Cable Length : Date Installed : 2000-04-04T18:00Z Date Removed : Additional Information : SCIGN Adaptor : Mounted on permanently installed SCIGN : adapter. Antenna height is standard value : relative to adapter reference point, a : dimpled nub. 4.x Antenna Type : (A20, from rcvr_ant.tab; see instructions) Serial Number : (A*, but note the first A5 is used in SINEX) Antenna Reference Point : (BPA/BCR/XXX from "antenna.gra"; see instr.) Marker->ARP Up Ecc. (m) : (F8.4) Marker->ARP North Ecc(m) : (F8.4) Marker->ARP East Ecc(m) : (F8.4) Alignment from True N : (deg; + is clockwise/east) Antenna Radome Type : (A4 from rcvr_ant.tab; see instructions) Radome Serial Number : Antenna Cable Type : (vendor & type number) Antenna Cable Length : (m) Date Installed : (CCYY-MM-DDThh:mmZ) Date Removed : (CCYY-MM-DDThh:mmZ) Additional Information : (multiple lines) 5. Surveyed Local Ties 5.x Tied Marker Name : Tied Marker Usage : (SLR/VLBI/LOCAL CONTROL/FOOTPRINT/etc) Tied Marker CDP Number : (A4) Tied Marker DOMES Number : (A9) Differential Components from GNSS Marker to the tied monument (ITRS) dx (m) : (m) dy (m) : (m) dz (m) : (m) Accuracy (mm) : (mm) Survey method : (GPS CAMPAIGN/TRILATERATION/TRIANGULATION/etc) Date Measured : (CCYY-MM-DDThh:mmZ) Additional Information : (multiple lines) 6. Frequency Standard 6.1 Standard Type : INTERNAL Input Frequency : Effective Dates : 1993-05-13/ Notes : 6.x Standard Type : (INTERNAL or EXTERNAL H-MASER/CESIUM/etc) Input Frequency : (if external) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 7. Collocation Information 7.x Instrumentation Type : (GPS/GLONASS/DORIS/PRARE/SLR/VLBI/TIME/etc) Status : (PERMANENT/MOBILE) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 8. Meteorological Instrumentation 8.1.x Humidity Sensor Model : Manufacturer : Serial Number : Data Sampling Interval : (sec) Accuracy (% rel h) : (% rel h) Aspiration : (UNASPIRATED/NATURAL/FAN/etc) Height Diff to Ant : (m) Calibration date : (CCYY-MM-DD) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 8.2.x Pressure Sensor Model : Manufacturer : Serial Number : Data Sampling Interval : (sec) Accuracy : (hPa) Height Diff to Ant : (m) Calibration date : (CCYY-MM-DD) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 8.3.x Temp. Sensor Model : Manufacturer : Serial Number : Data Sampling Interval : (sec) Accuracy : (deg C) Aspiration : (UNASPIRATED/NATURAL/FAN/etc) Height Diff to Ant : (m) Calibration date : (CCYY-MM-DD) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 8.4.x Water Vapor Radiometer : Manufacturer : Serial Number : Distance to Antenna : (m) Height Diff to Ant : (m) Calibration date : (CCYY-MM-DD) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 8.5.x Other Instrumentation : (multiple lines) 9. Local Ongoing Conditions Possibly Affecting Computed Position 9.1.x Radio Interferences : (TV/CELL PHONE ANTENNA/RADAR/etc) Observed Degradations : (SN RATIO/DATA GAPS/etc) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Additional Information : (multiple lines) 9.2.x Multipath Sources : (METAL ROOF/DOME/VLBI ANTENNA/etc) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Additional Information : (multiple lines) 9.3.x Signal Obstructions : (TREES/BUILDLINGS/etc) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Additional Information : (multiple lines) 10. Local Episodic Effects Possibly Affecting Data Quality 10.x Date : (CCYY-MM-DD/CCYY-MM-DD) Event : (TREE CLEARING/CONSTRUCTION/etc) 11. On-Site, Point of Contact Agency Information Agency : Berkeley Seismological Laboratory Preferred Abbreviation : BSL Mailing Address : University of California : 215 McCone Hall : Berkeley CA 94720-4760 Primary Contact Contact Name : Ingrid Johanson Telephone (primary) : 510.642.3977 Telephone (secondary) : Fax : 510.643.5811 E-mail : bard@seismo.berkeley.edu Secondary Contact Contact Name : Doug Neuhauser Telephone (primary) : 510.642.3977 Telephone (secondary) : 510.642.0931 Fax : 510.643.5811 E-mail : bard@seismo.berkley.edu Additional Information : 12. Responsible Agency (if different from 11.) Agency : Preferred Abbreviation : Mailing Address : Primary Contact Contact Name : Telephone (primary) : Telephone (secondary) : Fax : E-mail : Secondary Contact Contact Name : Telephone (primary) : Telephone (secondary) : Fax : E-mail : Additional Information : 13. More Information Primary Data Center : NCEDC http://www.ncedc.org Secondary Data Center : URL for More Information : http://www.ncedc.org/bard Hardcopy on File Site Map : Site Diagram : Horizon Mask : Monument Description : Site Pictures : Additional Information : Antenna Graphics with Dimensions Ashtech: GEODETIC L1/L2 ^ +-------------------+ +--+ +-------+-----------+-----------+--------+ +--+ <--0.064 TGP=L1=L2 +-+--+ +------------+-------------+-------------+ +--+-+ <-- 0.060 BGP |-------------| |-------------| |-------------| |-------------| +------x------+ <-- 0.000 ARP <-- 0.080 --> <-- 0.2636 --> <-- 0.286 --> Ashtech w/Dorne-Margolin Choke Ring ----- / + \ <-- 0.128 L2 | + | <-- 0.110 L1 +--------------------------------------------------+ <-- 0.102 TCR | | | | | | | | +-+--------------------------------------------------+-+ <-- 0.038 BCR +-------------------+-------------+--------------------+ <-- 0.035 BGP | | =| | +------x------+ <-- 0.000 m ARP <-- 0.381 --> NOTE: Dimensions and Offsets Presumed to be same as for TurboRogue DM-T (tests pending) ARP: Antenna Reference Point L1 : L1 Phase Center L2 : L2 Phase Center TCR: Top of Chokering BCR: Bottom of Chokering TGP: Top of Ground Plane BGP: Bottom of Ground Plane TPA: Top of Preamplifier BPA: Bottom of Preamplifier