Table of Contents

Interface

The 4 icons in the top right corner toggle the following content in and out of view:

List

The list is loaded by default the first time you open the interface. The list can be toggled in and out of view by clicking on List in the top right corner. The list provides the least resource intensive method for viewing earthquakes. The list loads all earthquakes from the currently selected feed (Settings > Earthquakes), and by default shows the most recent earthquake first (Settings > List Sort Order).

Downloads

Map

Map Projection
The earthquake map projection is Web Mercator.
Map Reference Model
The reference model is WGS-84.
Map Software
Interactive map interface powered by Leaflet.

To show (or hide on desktop) the map, click Map in the top right corner. Earthquakes from the currently selected feed (Settings > Earthquakes) are loaded onto the map.

Map Controls

Plus/ Minus
Click the plus or minus control to zoom in or out, respectively.
Magnifying Glass
Click the magnifying glass control to enable box zoom. With the crosshair cursor, click and drag, to define a box on the map. The map will zoom in on the defined area.
Zoom to…
Select a place from the "Zoom to" drop-down control, to pan and zoom the map to the specified location.

Map Interactions

Zoom
Use the keyboard plus and minus keys, map controls (+,-), box zoom tool (magnifying glass), mouse scroll wheel, or double click the map to zoom.
Pan
Click and drag, or use the arrow keys (left,right,up,down) to pan the map.
Select
Click on an event marker to open a pop-up summary of the event (bottom-left corner of screen). Click the "X" in the upper-right corner of the event summary to close the pop-up.
Hover
Hover over a U.S. fault, when the fault layer is visible, to display a tooltip with the fault name (Settings > Map Layers > U.S. Faults).

Map Layers

Map Layers can be changed in Settings > Map Layers.

Grayscale Map

This layer is from an Esri GIS service titled “Light Gray Canvas”. This minimal map is used as the default because it loads more quickly in the browser than the other maps, and it emphasizes the earthquakes. Detailed information about this map is on the Esri website.

Sources: Esri, DeLorme, NAVTEQ.

Terrain Map

This layer is from an Esri GIS service titled “National Geographic World Map”. The map was developed by National Geographic and Esri and reflects the distinctive National Geographic cartographic style in a multi-scale reference map of the world. Detailed information about this map is on the Esri website.

Sources: National Geographic, Esri, DeLorme, NAVTEQ, UNEP-WCMC, USGS, NASA, ESA, METI, NRCAN, GEBCO, NOAA, iPC.

Street Map

Map tiles courtesy MapQuest. Portions of the data courtesy NASA/JPL-Caltech and U.S. Dept. of Agriculture, Farm Service Agency.

Satellite Map

Map tiles courtesy MapQuest. Portions of the data courtesy NASA/JPL-Caltech and U.S. Dept. of Agriculture, Farm Service Agency.

Plate Boundaries

This data was constructed as part of the USGS Seismicity of the Earth Map Series, modified from the Peter Bird Plate Boundary Model (Bird, G^3, 2003).

U.S. Faults

The data used for these features was acquired from the Hazard Faults Database for the United States. See the Quaternary Fault and Fold Database of the United States for more information.

Known hazardous faults and fault zones in California and Nevada

The known active fault segments in California and Nevada can be seen in Figure 25 of USGS Open-File Report 96-532: National Seismic Hazard Maps, June 1996: Documentation by Arthur Frankel, Charles Mueller, Theodore Barnhard, David Perkins, E.V. Leyendecker, Nancy Dickman, Stanley Hanson, and Margaret Hopper.

For northern California, the potential sources of earthquakes larger than magnitude 6 are documented in Open-File Report 96-705: Database of Potential Sources for Earthquakes Larger than Magnitude 6 in Northern California by the Working Group on Northern California Earthquake Potential (chaired by Jim Lienkaemper).

For the state as a whole, see USGS Open-File Report 96-706: Probabilistic seismic hazard assessment for the State of California by Petersen, M. D., Bryant, W.A., Cramer, C.H., Cao, T., Reichle, M.S., Frankel, A.D., Lienkaemper, J.J., McCrory, P.A., and Schwartz, D.P, 1996 (published jointly as California Division of Mines and Geology Open-File Report 96-08. The faults and fault zones described in these reports are known to have been active in the last 2 million years and are thought to pose a measurable hazard.

For California the faults on the individual zoomed-in and special maps come from the three categories of faults believed to have been active in the last 700,000 years shown on the “Preliminary Fault Activity Map of California” by C.W. Jennings (1992, California Division of Mines and Geology Open-File Report 92-03). This map has been superseded by Jennings, C.W., 1994, Fault activity map of California and adjacent areas, with locations and ages of recent volcanic eruptions: California Division of Mines and Geology, Geologic Data Map No. 6, map scale 1:750,000.

For Nevada the faults on the individual zoomed-in and special maps come from USGS Open-File Report 96-532 mentioned above.

For more information on files and images discussed above visit the 1996 Hazard Maps Documentation Page.

U.S. Hazards

US hazard is from the USGS Seismic Hazard Mapping Project (NSHM)

Settings

To show settings (or hide on desktop), click Settings in the top right corner. You can save your settings or search results by bookmarking the resulting URL in your browser.

Earthquakes

Auto Update

This option will automatically update the earthquake data every minute. Auto update defaults to ON for desktop devices and OFF for mobile devices.

Feeds

The default feed is set to display earthquakes of magnitude 2.5 and greater during the past 24 hrs (1 Day, Magnitude 2.5+). You can choose from the following options:

See Search Earthquake Archives for more details on how to search the catalog.

List Sort Order

Sort Order

Choose the order to display the earthquakes in the list:

Map Layers

See Map Layers for more information on each layer.

Base Maps

Choose from one of four base maps:

Overlays

You can enable/ disable any of the overlays on the map:

TimeZone

The time for the earthquakes displayed in this interface will be based on:

Search Earthquake Archives

If you want to display earthquakes older than 30 days, or you want to search the earthquake catalog, click on "Search Earthquake Archives".

Search Options

See Earthquake Search and Web Service API Documentation.

How to Print

Map

To print the map, take a screenshot by following these instructions:

List

Using your browser's print feature will print the list of earthquakes in a printer friendly format.

Browser Support

We support the two most recent versions of Chrome, Firefox, Safari, and Internet Explorer. As soon as a new version is released, we drop support of the third oldest version and work on supporting the newest stable release. If you are having problems with the earthquake map, upgrading your browser to the most current version may resolve the issue.

Desktop

Supported & Tested

Not Tested

* Edge is only tested in standards mode; compatibility view is not supported. If your browser has rendered the application in compatibility view, you will need to disable this setting.

Mobile

Android users, we recommend using the Chrome browser or Firefox browser app in place of the default native browser on your android device.

Supported & Tested

Not Tested

Known Bugs

Browser Crashes
If your browser crashes, it's probably because you're trying to view too many earthquakes. See our disclaimers for tips on how to avoid crashing a resource strapped device.
Issues Reported in GitHub
See USGS earthquake-latest-earthquakes issues.

Report other problems that you experience by entering a GitHub issue or by sending us a message.

Disclaimer

The new Earthquake Map/List pages are slower than the older generation earthquake maps (recenteqs) because they provide additional benefits to viewing and interacting with the earthquake data.

If you are using a mobile device to view the earthquake pages, or have limited bandwidth, here are a few steps you can take to improve your experience using the interface:

  • Avoid loading large feeds (7 Days, All Magnitudes & 30 Days, Magnitude 2.5+).
  • Use the Grayscale Maps (Settings > Map Layers > Grayscale).
  • View earthquakes in the List, instead of on the Map.