2008 National Seismic Hazard Maps

2008 National Seismic Hazard Maps-Fault parameters

New Search

Fault Name	State
Tule Springs Rim fault	Oregon

GEOMETRY
Dip (degrees)	40/60/50
Dip direction	W
Sense of slip	normal
Rupture top (km)	0
Rupture bottom (km)	15
Rake (degrees)	-90
Length (km)	37

MODEL VALUES
Probability of activity	1
Minimum magnitude	6.5
Maximum magnitude	6.90
b-value	0.8

Assigned Dip	Fault-Parallel Slip Rate	Width	Annual Rate	a-value	Branch Weight
40	0.16	23.3	1.60e-04	1.254	0.2
50	0.13	19.6	1.12e-04	1.102	0.6
60	0.12	17.3	8.80e-05	0.995	0.2

Comments
Assigned vertical slip rate is from a three-point distribution of slip rates reported by Geomatrix Consultants, Inc. (1995). Dip of fault changed to 50? based on redefined regional default value (Lund, 2006).

Selected References
Geomatrix Consultants, Inc., 1995, Seismic design mapping, State of Oregon: Technical report to Oregon Department of Transportation, Salem, Oregon, under Contract 11688, January 1995, unpaginated, 5 pls., scale 1:1,250,000. Lund, W.R., ed., 2006, Basin and Range Province Earthquake Working Group seismic-hazard recommendations to the U.S. Geological Survey National Seismic Hazard Mapping Program: Utah Geological Survey Open-File Report 477, 23 p, ugspub.nr.utah.gov/publications/open_file_reports/OFR-477.pdf.

Selected References

Geomatrix Consultants, Inc., 1995, Seismic design mapping, State of Oregon: Technical report to Oregon Department of Transportation, Salem, Oregon, under Contract 11688, January 1995, unpaginated, 5 pls., scale 1:1,250,000.
Lund, W.R., ed., 2006, Basin and Range Province Earthquake Working Group seismic-hazard recommendations to the U.S. Geological Survey National Seismic Hazard Mapping Program: Utah Geological Survey Open-File Report 477, 23 p, ugspub.nr.utah.gov/publications/open_file_reports/OFR-477.pdf.