You are here: Home » Research & Monitoring » Seismic Hazard Mapping » OS2 SeisRisk III Files

OS2 SeisRisk III Files

Files which may be downloaded from this web page include:

S30S2SAA.FOR, 94Kb, Source code for the OS/2 SAA version

S30S2SAA.EXE, 59Kb, Source code for the OS/2 SAA version

15PUB.DAT, 2Kb, File 15--Inputs, SEISRISK III Sample Problem from USGS Bulletin 1772

16PUB.DAT, 51Kb, File 16--Outputs, SEISRISK III Sample Problem from USGS Bulletin 1772

NOTE: To download the the files via anonymous ftp see GENERAL:Anonymous FTP Information

The OS/2 version of SEISRISK III requires at least 3 MB of RAM and a mathematical co-processor for operation under OS/2. The source code was modified from the VAX version and compiled to conform to the IBM System Application Architecture, 1988 (SAA) guidelines.

Additional information regarding the adaptation of SEISRISK III for OS/2 may be obtained by ordering OPEN-FILE REPORT 89-557 "PROGRAM SEISRISK III ADAPTED TO PERSONAL COMPUTERS" (Arnold).

Designate order by number & letter

  • OF89-557-A, Documentation, 31p.;
  • OF89-557-B, OS/2 executable module, 3.5" diskette;
  • OF89-557-C, OS/2 executable module, 5.25" diskette;
  • OF89-557-D, OS/2/SAA source program, 3.5" diskette;
  • OF89-557-E, OS/2/ANSI FORTRAN 77 source program, 3.5" diskette;
  • OF89-557-F, OS/2/SAA source program, 5.25" diskette;
  • OF89-557-G, OS/2/ANSI FORTRAN 77 source program, 5.25" diskette;

All versions are accompanied by a set of test data.