You are here: Home » Research & Monitoring » Seismic Hazard Mapping » DOS Files

DOS Files

Files which may be downloaded from this web page include:

S3DOSSAA.FOR, 95Kb, Source code for the DOS SAA version

S3DOSSAA.EXE, 518Kb, Executable code for the DOS SAA version

15PUB.DAT, 2Kb, File 15-Inputs, SEISRISK III Sample Problem from USGS Bulletin 1772

16PUB.DAT, 51Kb, File 16--Outputs, SEISRISK III Sample Problem from USGS Bulletin 1772

To download the files via anonymous ftp, see GENERAL:Anonymous FTP

The DOS version of SEISRISK III requires at least 640 KB of RAM and a mathematical co-processor for operation under DOS. The source code was modified from the VAX version and compiled to conform to the IBM System Application Architecture, 1988 (SAA) guidelines.

Additional information regarding the adaptation of SEISRISK III for DOS may be obtained by ordering OPEN-FILE REPORT 89-557 "PROGRAM SEISRISK III ADAPTED TO PERSONAL COMPUTERS" (Arnold). Designate order by number & letter

  • OF89-557-A, Documentation, 31p.;
  • OF89-557-H, DOS/SAA source program, 3.5" diskette;
  • OF89-557-J, DOS/ANSI FORTRAN 77 source program, 3.5" diskette;
  • OF89-557-K, DOS/SAA source program, 5.25" diskette;
  • OF89-557-L, DOS/ANSI FORTRAN 77 source program, 5.25" diskette;
  • OF89-557-M, DOS executable module, 3.5" diskette;
  • OF89-557-N, DOS executable module, 2-5.25" diskettes in BACKUP format.

All diskettes contain the described programs in ASCII format in a two level directory tree except for OF89-557-N. For it, use RESTORE with the /S option which creates a directory \SEIS3 on the desired drive. All versions are accompanied by a set of test data.