Seismic Network Operations
IU LSZ
Lusaka, Zambia
IU LSZ commences operations on: 1994,217
| Host: | Zambia Geological Survey |
|---|---|
| Latitude: | -15.278 |
| Longitude: | 28.188 |
| Elevation: | 1200 |
| Datalogger: | Q330 |
| Broadband: | STS-1H/VBB |
| Accelerometer: | FBA_ES-T_EpiSensor_Accelerometer |
| Telemetry Status at the NEIC: |
 Last Data In Less Than 10 Minutes |
Vault Condition: The vault is constructed of concrete. The isolated pier is also constructed of concrete and is attached to granite.
Site Geology: Granite
| Location Code | Channel Code | Instrument | Flags | Sample Rate | Dip | Azimuth | Depth |
|---|---|---|---|---|---|---|---|
| 10 | BHZ | STS-2 High-gain | CG | 40.00 | -90.00 | 0.00 | 0.00 |
| 10 | BH2 | STS-2 High-gain | CG | 40.00 | 0.00 | 90.00 | 0.00 |
| 10 | BH1 | STS-2 High-gain | CG | 40.00 | 0.00 | 0.00 | 0.00 |
| 00 | BHZ | STS-1H/VBB | CG | 20.00 | -90.00 | 0.00 | 0.00 |
| 00 | BH2 | STS-1H/VBB | CG | 20.00 | 0.00 | 90.00 | 0.00 |
| 00 | BH1 | STS-1H/VBB | CG | 20.00 | 0.00 | 0.00 | 0.00 |
| 20 | HNZ | FBA ES-T EpiSensor Accelerometer | TG | 100.00 | -90.00 | 0.00 | 0.00 |
| 20 | HN2 | FBA ES-T EpiSensor Accelerometer | TG | 100.00 | 0.00 | 90.00 | 0.00 |
| 20 | HN1 | FBA ES-T EpiSensor Accelerometer | TG | 100.00 | 0.00 | 0.00 | 0.00 |
| 10 | HHZ | STS-2 High-gain | TG | 100.00 | -90.00 | 0.00 | 0.00 |
| 10 | HH2 | STS-2 High-gain | TG | 100.00 | 0.00 | 90.00 | 0.00 |
| 10 | HH1 | STS-2 High-gain | TG | 100.00 | 0.00 | 0.00 | 0.00 |
| 30 | LDO | IU Paroscientific Microbarograph | CW | 1.00 | 0.00 | 0.00 | 0.00 |
| 20 | LNZ | FBA ES-T EpiSensor Accelerometer | CG | 1.00 | -90.00 | 0.00 | 0.00 |
| 20 | LN2 | FBA ES-T EpiSensor Accelerometer | CG | 1.00 | 0.00 | 90.00 | 0.00 |
| 20 | LN1 | FBA ES-T EpiSensor Accelerometer | CG | 1.00 | 0.00 | 0.00 | 0.00 |
| 10 | LHZ | STS-2 High-gain | CG | 1.00 | -90.00 | 0.00 | 0.00 |
| 10 | LH2 | STS-2 High-gain | CG | 1.00 | 0.00 | 90.00 | 0.00 |
| 10 | LH1 | STS-2 High-gain | CG | 1.00 | 0.00 | 0.00 | 0.00 |
| 00 | LHZ | STS-1H/VBB | CG | 1.00 | -90.00 | 0.00 | 0.00 |
| 00 | LH2 | STS-1H/VBB | CG | 1.00 | 0.00 | 90.00 | 0.00 |
| 00 | LH1 | STS-1H/VBB | CG | 1.00 | 0.00 | 0.00 | 0.00 |
| 10 | VHZ | STS-2 High-gain | CG | 0.10 | -90.00 | 0.00 | 0.00 |
| 10 | VH2 | STS-2 High-gain | CG | 0.10 | 0.00 | 90.00 | 0.00 |
| 10 | VH1 | STS-2 High-gain | CG | 0.10 | 0.00 | 0.00 | 0.00 |
| 00 | VHZ | STS-1H/VBB | CG | 0.10 | -90.00 | 0.00 | 0.00 |
| 00 | VH2 | STS-1H/VBB | CG | 0.10 | 0.00 | 90.00 | 0.00 |
| 00 | VH1 | STS-1H/VBB | CG | 0.10 | 0.00 | 0.00 | 0.00 |
PDF, Last Month
PDF, Last Year
PDF, Month
PDF, Current Week
PDF, Year
Availability, Since 1972
Availability, 2 Month
As part of the annual calibration process, the USGS runs a sequence that includes a random, a step, and several sine wave calibrations. The USGS analyzes the random binary calibration signal in order to estimate the instrument response. The figures below show the results from the analysis of the most recent processed calibration at the station.
We use an iterative three-step method to estimate instrument response parameters (poles, zeros, sensitivity and gain) and their associated errors using random calibration signals. First, we solve a coarse non-linear inverse problem using a least squares grid search to yield a first approximation to the solution. This approach reduces the likelihood of poorly estimated parameters (a local-minimum solution) caused by noise in the calibration records and enhances algorithm convergence. Second, we iteratively solve a non-linear parameter estimation problem to obtain the least squares best-fit Laplace pole/zero/gain model. Third, by applying the central limit theorem we estimate the errors in this pole/zero model by solving the inverse problem at each frequency in a 2/3rds-octave band centered at each best-fit pole/zero frequency. This procedure yields error estimates of the 99% confidence interval.
| Loc | Chan | Cal Date | Epoch-Span | Grade | Amp Nominal Error (dB) | Amp Best Fit Error (dB) | Phase Nominal Error (degree) | Phase Best Fit Error (degree) | Sensor | Cal Type |
|---|---|---|---|---|---|---|---|---|---|---|
| 10 | BHZ | 2009:343 | 2008:252 to 2010,351,13 | A | 0.014856 | 0.014201 | 0.10306 | 0.099477 | STS-2-HG | Random |
| 00 | BHZ | 2009:342 | 2008:252 to No Ending T | A | 0.018207 | 0.010968 | 0.12373 | 0.11774 | STS1HVBB | Random |
-
Current IssuesLong period noise on the STS-1 N-S sensor.
-
2008-09-08Upgraded to Q330 digitizer.
